* 图文详情- */>
D SERIES
Feature:
◎Automatic AC soft-start protection at startup: Suppresses the starting current, does not affect the operation of other equipment and protects the internal circuit of the machine from impact.
◎It has a full-featured protection system, especially infinite overload protection, and can calmly face to the stereo 2 ohm load.
◎Delayed loading after startup: Protect the speaker from impact and start up silently.
◎DC output load protection: When the neutral point drifts and there is DC output, it can prevent the speaker from being damaged by impact.
◎Over-current automatic tracking output current-limiting soft protection: When the load impedance is too low and the input signal is over-excited, the power amplifier itself and the speaker are protected.
◎Clipping voltage limit protection: When the input signal is too large, it will make the power amplifier peak clipping distorted output, and it is easy to damage the speaker. This circuit can automatically detect the compression signal to protect the speaker.
◎Overheating protection: When the temperature of the power tube exceeds 80 degrees, the overheating protection automatically starts to cut off the load; when it is lower than 70 degrees, it automatically resumes work.
◎Load short-circuit protection: When the output is short-circuited, the short-circuit current is too large, the protection automatically cuts off the output, protects the power amplifier, and automatically recovers when the short-circuit is removed.
◎Shutdown protection: cut off the load when shutting down, to realize silent shutdown to protect speaker.
Specifications:
Model............ D-4 D-6 D-8
Stereo Mode...... Average continuous output Average continuous output Average continuous output
8Ω 20Hz-20KHz,0.03% THD 400W 600w 800w
4Ω 20Hz-20KHz,0.05% THD 600W 900w 1200w
2Ω 1KHz 1% THD 800W 1100w 1400w
Input sensitivity... 0.77V/1.0V/1.55V 0.77V/1.0V/1.55V 0.77V/1.0V/1.55V
Output circuit H frequency H frequency H frequency
Damping constant..... >420 >480 >520
Distortion(SMPTE-IM) - <0.01%8Ω <0.01%8Ω
Frequency response 20Hz-20KHz,±0.1dB
Input impedance 20KΩ Balance 10KΩ unbalance
Cool Variable speed fan with airflow from back to front
Connectors Input:Balance XLR interface;Output:4-core seakon
Amplifier protection: Turning-on protection;short-circuit;direct-current;overheat; Reset switch and over audio protection device
Load protection: Automatic mute switch, DC fault power is automatically disconnected
Weight 16Kg 18Kg 19KG
Dimensions 483x89x456.5mm 483x89x456.5mm 483x89x45