K-6 Professional digital amplifier

Features:

This four-channel power amplifier adopts 1U 9-inch standard design, small size, light weight, easy to install. The circuit adopts CLASS D power amplifier mode and reliable and efficient R-SMPS power supply system, and integrates active power factor correction circuit (PFC). PFC makes this power amplifier more efficient and controllable. It also has The extremely high power density can adjust the current waveform according to the AC voltage waveform to adapt to the wide voltage operation worldwide, so that a single standard current circuit breaker can carry higher power.

Specifications:

model: K6

Power output: 1KHz, <0.05%THD:

8Ω stereo power: 4x1500W

4Ω stereo power: 4x2800W

8Ω bridge power: 2x4800W

THD total harmonic distortion (20Hz-20kHz for 1W): <0.1%

THD total harmonic distortion (1kHz and 1 dB below clipping): <0.05

Built-in DSP: NO

Signal to noise ratio: >106dB

Frequency response: 10Hz-34kHz

Damping coefficient: >600

Impedance (balanced/unbalanced): 20KΩ/10KΩ

Gain (optional): 0.775V/1V/32dB

Output socket: Speakon Connectors(NEUTRIK)

Input socket: Combo XLR type, 3pin (NEUTRIK)

Terminal block: XLR type, 3pin male (NEUTRIK)

Power amplifier protection: short circuit, current interruption, overheat, overload, DC protection, super audio protection device

Power requirements: 90-265V~50Hz (PFC)

Dimensions: 483x429x44mm

Net weight: 10.5Kg